Discussion in 'Fan Films, Fan Audio & SciFi 3D' started by krnbanguboi, Oct 23, 2005.
Do all threads look alike to you, Nate? Huh?
Well Nate, um like ok for example how many adjustment layers do u use for ur core glow, and wats the fast blur amount, and opacity amount?
I can't speak for Nate here, but generally, this varies. You can't use the same setting for a far shot and a close-up. I did, however, make a template a couple of years back that generates "correct" blurs(based on my preference, though) based on your initial blur amount.
That's what I've done in Shake and After Effects. I adjust the core blur and then all the other layers are linked to that and will adjust accordingly. It really speeds up the process when you have over 100 shots to plow through. To answer your question, John, the main softening of the core on my shots are usually just a blurring of 1, 1.5 or 2, depending, as Tom said, on the distance from the camera. There are a few shots where I'll bump that higher, and I believe like, one shot in Duel of the Dorks where I went up to 4, but that's because the saber prop was inches from the lens. Of course we also had a shallow depth of field, so there was an even larger blur over the entire saber to throw it out of focus. Anywho... the core blur is at 100% opacity and set to normal instead of screen. Otherwise the unblurred core would show through, defeating the entire purpose of the initial softening.
Now I'm not sure if this is the place to post this, a mod can direct me accordingly(it's been a long time since I've visited this SW forum.)
Anywho, I'm looking for someone in the special f/x field to do a 'lightsaber' effect for 4 small clips for a short new comedy based on Star Wars. If anyone is interested in helping please message me or email email@example.com
It would be much appreciated!
Btw, the film is called STAR WARS: GREEN HARVEST.
Keep your spirits up, you lightsaber artists! [link=http://www.youtube.com/watch?v=0Ey3g6BmuTI&feature=player_embedded]Inspiration![/link]
That's actually really a good thing to post during the time of an LCC. Thanks. Pointless, but inspiring.
Oh it is completely 100% pointless and random!
We did about as many in [link=http://www.youtube.com/watch?v=yadbHXmZjD0]one clip[/link]
I have no idea how I had never seen that, but that's awesome.
I never actually posted it in the LCC thread, just on Facebook. Clearly you don't stalk me enough.
Okay, I've had our first training session today where most of the team (minus an actor and one rotoscoper) was gathered and we did two hours of stickbanging.
It was... well, messy. I assume we'll get more into it, but the beginning was kind of a desaster with everybody just cracking up every few seconds and pointing out how stupid everybody looked with the sabers.
I guess it's my fault as well. I didn't make an entrace as a serious, down-to-earth filmmaker, but rather started like "Well, um, so we're doing that fight with laserswords, let's not hit each other too hard or look like nerds".
*Psst* I think you got the wrong thread
Be nice to me. It was my first time.
So, for practicing, I wanted to repair some of the lightsaber glows of the so-called Special Edition of ANH.
Someone (I guess VaporTrail?) said he didn't like them too much, though.
They're fine. The aura just isn't my style.
It'd be nice to have unroto'd versions of those shots so we could replace the glows proper, but I've never seen anything but outtakes.
The glow/aura seems a tad too big, and the dropoff is a bit sudden for a glow that big. Nice colors, though.
So anybody mind bringing up the techniques used for day sabers? And just to be safe, is there a way of keeping glows when a saber is against the sky, or do I just try to avoid that?
In my experience, the key to having a saber not blown out against a sky is to have a properly exposed sky. =)
I did those sabers just how I would any other, prior to having learned the daytime effect. Pretty sure it was the Adj. layer method.
I have the Jedi573's "Daysaber" tutorial saved in a Word document. Is the e-mail in your profile still current?
Thought I'd get back into rotoing the other day. Here's one that I did real quick trying to get a good fairly unique looking green blade for a short that we're gonna be shooting some time in januaryish time frame, and for next years LCC.
I love how it turned out, because I think it looks a bit more menacing than a just plain green glow. Almost like the blade is burning hotter than normal, or something.
The photo used is just a random photo that I grabbed off of the rebel legion site.